IAFilm Productions

Independent Alternative Film
  Home > 6. Other Archives > Movie HOWTOs > AVI_Recovery.htm

This is a 2007 story. However to the best of my knowledge it is still generally relevant in 2020. Files continue to have headers that can get corrupted and can be fixed with "hex editors".

Publishing the Video "U. S. Aiono - What is Success?"

A case study in video file disaster recovery.


As tapeless video shooting by writing files to a memory card becomes more and more common, I hope this story of messing it up but then recovering is useful to others. I found that recovery is possible but very difficult and time-consuming. My NUMBER ONE advice is - if you see a "change battery" warning then STOP.

I assumed that the camera would gracefully shut down saving the file but that was NOT the case!



I was shooting an event with a camera recording video to a memory card.

I was getting a low-battery warning but I kept going to try to capture all of an almost-complete ceremony.

When the battery failed, the resulting file appeared on the memory card
but displayed a size of "0 kilobytes".

I spent a lot of time downloading and trialling various recovery software.
I found that it had limited capability to fix and I needed to do a lot of manual "pre-fixing" to get close enough to the correct specs for the fixing software to help.

My path to recovery was:

  1. Run the Windows utility CHKDSK /F /R on the memory card.
    This reported it had found "lost chains" and recovered the file as "FILE0000.CHK".
    I made backup and working copies of "FILE0000.CHK"
  2. I discovered that "FILE0000.CHK" was the missing video file but it had a blank header. Video Fixing software did not work.
    I used the Cygnus Hex Editor Free Edition to copy and paste the header from another video file made by the same camera.
  3. With the new header, the file still would not play but the error messages from a range of players looked more encouraging than before.
    I tried video fixing software again. Both "FixVideo" and "AVI Previewer" were successful at identifying a "bad frame 1" and performing a fix.
    The video file was now playable.
  4. I found that "Windows Movie Maker" was successful at identifying the correct length of the video. I used Windows Movie Maker to export the file to the "DV" video standard to act as the working file for editing.



The camera is a Canon MVX25i hybrid video and stills camera. The MVX25i is the PAL version of a model better known in the NTSC world as the "Canon Optura 40". It can record video to tape or to memory card. The memory card video is of lesser quality but has post-production convenience advantages.

The event was the 2007 Diploma Graduation ceremony for the Dept of Computer and I.T. at the Manukau Institute of Technology. I was using memory card video:

(1)   For quick and easy publication of the result on a computer network

(2)   Because I did not have an external microphone or sound system patch available so I felt that I could get better sound from the built-in mic without the whirring noises of the tape drive motor.


I used up all of the following Saturday on the resulting recovery, mainly because of lack of information causing me to follow a lot of blind alleys. I persevered

(1)   Because the guest speaker Uluomatootua Aiono gave an excellent speech which I very much wanted to save.

(2)   Because investigating the file recovery issue in order to write this article became an aim of the exercise.



Step 1 - "CHKDSK"

This is a very old Microsoft Command-Line Utility that dates from the days of DOS. I was unable to find it on my Windows Vista system at the Institute so I had to copy everything and take it home to work with on a Windows XP system.

CHKDSK is like an old friend which has in the past helped me rescue files from failing hard drives. It was a relief to discover that it worked just fine on a memory card and produced a recovery file.


Step 2 - Find a Header

I first tried renaming "FILE0000.CHK" to "FILE0000.AVI" and playing it or fixing it in a lot of software packages. All reported messages like "not a video".

After looking at the raw file in "Wordpad" I made this guess:


Hypothesis: The Canon camera works by writing the file raw with a blank header and on a Correct-Stop it then knows the file statistics( eg how long it is) and can go back and fill in the header with that information.


Experiment: Copy the header from a Canon file of similar size and Paste it into the blank space of this one. Then try to play it.


I tried with "Wordpad" and failed.

I tried with the binary editor in "Microsoft Visual Studio".

I had 2 recovered video files from the card. "Visual Studio" worked just fine with the smaller file of 126 Meg. But on loading the important file of 267 Meg the copy/paste failed to work.

Off for another Internet search for downloads.

I found " Cygnus Hex Editor FREE EDITION" (Softcircuits, 2006).

This is simply excellent!


The layout, and the situation, is very clear from the diagram.

FILE0000.CHK is on the left, and another avi file is on the right.

The header from "LIST>" onwards matches perfectly and the blank space is the correct size to match the avi file header. Copying and pasting is straightforward.





Step 3

With the new header, the file still would not play but the error messages from a range of players looked more encouraging than before.
I tried video fixing software again. The trial versions of both "FixVideo"
and "AVI Previewer" were successful at identifying a "bad frame 1" and performing a fix. Note that the trial of AVI Previewer is restricted to processing a video of max size of 150 Meg so its success was with my second smaller recovered video. "FixVideo" was the product actually used for recovering "U. S. Aiono - What is Success?"
The video file was now playable.


I did a lot of experimentation with correcting the running time.

The recovered video was 34 minutes long. But my borrowed header was from a video of 7 minutes so the result at this stage showed up in "Windows Media Player" and "ULead Mediastudio Pro 8 Video Editor" as a 7 minute video.


I was able to find out how to change that - details in the appendix below - but that then turned out to be unnecessary because when I later opened the video with "Windows Movie Maker" I found that it ignored the borrowed header and assigned the correct length to the video.



Step 4

I used Windows Movie Maker to export the file to the "DV" video standard to act as the working file for editing in ULead.



How the number of frames is defined in AVI videos.


This is written as a DWORD, a 4 byte long integer, at Hex position "30".


In the Canon files, I observed that this is written in 2 places. I edited them both the same. I did not have time to experiment with leaving them different.


This is Hexadecimal numbering running from right to left

59 translates to 5 x16 + 9 = 89

21 translates to 2 x 16 + 1 = 33

The number of frames is therefore 33 x 256 + 89 = 8537


(Gruber, 2001)


Reference List


Aiono U., Calder J., Manukau Institute of Technology., 2007., "U. S. Aiono - What is Success?" [Web Video].,
Independent Alternative Film-makers Channel on Youtube,




Softcircuits, 2006. Cygnus Hex Editor FREE EDITION. Softcircuits Website.,
Retrieved 02 Jun 2007 from http://www.softcircuits.com/cygnus/fe/



Video-Fixer.com, 2003. Video-Fixer. [Software US$39.99], Video-Fixer.com Website.,
Retrieved 01 Jun 2007 from http://www.video-fixer.com



FDRLab, 2006. AVI Previewer.[Software US$19.99], FDRLab Data Recovery Centre Website,
Retrieved 01 Jun 2007 from http://www.avi-previewer.com



Gruber, T., 2001., AVI Header Format., Fastgraph Website,
Retrieved 02 Jun 2007 from http://www.fastgraph.com/help/avi_header_format.html [found via a Google search for "avi header"]